Ceramic Coating vs Spray Paint: How Hydrophobic Properties Repel Graffiti

Ceramic Coating vs Spray Paint: How Hydrophobic Properties Repel Graffiti

Everything You Need to Know About Ceramic Coating Chrome Surfaces Reading Ceramic Coating vs Spray Paint: How Hydrophobic Properties Repel Graffiti 8 minutes Next Can You Wax Over Ceramic Coatings?

For the average daily commuter, graffiti tends to be an entirely unpleasant, and completely unexpected surprise. An expletive enriched moment, where shock turns to panic, as you hastily ponder what to do, constantly fretting that by removing said pigment, you will somehow damage the clear coat or paint underneath. Sure, there are some pretty badass automotive graffiti projects out there, but these vehicles are few and far between.

Fortunately, those of you who have applied a nano ceramic coating to your vehicle’s exterior, are going to have one hell of a lot easier job than those who wrote the protectant off as “automotive snake oil.”

In today’s blog entry, we’ll review how a nano ceramic coating, like Armor Shield IX, protects against graffiti, markers, paint mishaps, and more. We’ll also explain some of the science behind this molecular magic, and how it makes the removal of graffiti a cinch.

Then, we’ll go over what products work best for graffiti removal, what to be wary of, and when it might be time to take the vehicle to a professional.

 

How Ceramic Coatings Work

A slab of cured Armor Shield IX pictured, resting atop the bottle from which it was poured. Photo Credit: Pan The Organizer/YouTube
A slab of cured Armor Shield IX pictured, resting atop the bottle from which it was poured. Photo Credit: Pan The Organizer/YouTube

If you are just getting into the nano ceramic protection game, or have been tinkering with these protective coatings for a while, and are still a tad fuzzy about exactly how they function on a molecular level, don’t fret.

Below you’ll find an abbreviated synopsis of how ceramic coating paint protection products work, along with a list of some of the key ingredients in AvalonKing’s industry-leading nano ceramic coating, Armor Shield IX.

You’ll also discover a few useful notes regarding what each product does, and how it helps make a nano ceramic coating develop its protective shell and function over the long run.

Ingredients Commonly Found in a Nano Ceramic Coating Product

  • Nano SiO2: This is the magic mystery sauce that provides a ceramic coating with that super-hard, quartz-like layer of protection it requires. The SiO2 chemical abbreviation represents silica, or silicon dioxide, an odorless solid that is primarily composed of silicon and oxygen atoms, which in “nano form” measures less than 100 nanometers in size. Once blended with the appropriate bonding agents and hardeners, a ceramic coating’s SiO2 content helps form a matrix-like structure that is both extremely hard and slick.
  • Nano TiO2: Titanium oxide/titanium dioxide (O2Ti or TiO2) can be found in all areas of daily life, including pharmaceutical products, glazes, enamels, antiseptics, and even toothpaste. In ceramic coatings, TiO2 helps improve hydrophobic water repelling capabilities, and makes for a slipperier, shinier surface. Rumor has it that Iron Man even uses it in the sack.
  • Activation of Fluorine: The dust-repelling properties of a ceramic coating are often attributed to this ingredient, as it makes it difficult for airborne debris to stick to hard surfaces. This, in turn, keeps a vehicle cleaner for longer periods of time and far easier to decontaminate.
  • Brightening Silicon Particles: All that shine and gloss has to come from somewhere, which is precisely what this ingredient does in a nano ceramic car coating product.
  • Polysilazane: The chemical and temperature tolerance levels of this chemical compound are impressive to say the least. It is polysilazane in particular that is accredited for making a nano ceramic coating so resistant to things like graffiti and chemicals.

Consumer-Grade Ceramic Coatings vs. Paint, Markers, Oils, and Other Permanent Pigments

Graffiti come in all colors, shapes, chemical compositions, and can be either intentional or unintentional. Photo Credit La Place - Paris/Facebook
Graffiti come in all colors, shapes, chemical compositions, and can be either intentional or unintentional. Photo Credit: La Place – Paris/Facebook

One of the most crucial things one must remember when dealing with ceramic coating products, is that not all ceramic coatings are created equal. As the recent head-to-head battle between Armor Shield IX vs Adam’s Polishes Graphene Ceramic Coating clearly illustrated, resiliency is oftentimes objective, especially when dealing with vandals with cans of spray paint, or even berry stains or bird droppings.

In all of these situations, the hydrophobic layer of protection provided by a quality, silica-rich ceramic coating will resist the contaminating chemicals in question, and cause them to harden atop its outer surface.

A graffiti on ceramic coated surface test is put through its paces. Photo Credit Forensic Detailing Channel/YouTube
A graffiti on ceramic coated surface test is put through its paces. Photo Credit: Forensic Detailing Channel/YouTube

The reason for this, is because this protective layer keeps contaminants “suspended” above a surface. While a stripe of spray paint may require some serious scrubbing if allowed to bond with an unprotected layer of clear coat, it won’t require nearly as much elbow grease if the surface has been ceramic coated.

Even heavily layered graffiti will require little more than a spritz of bug and tar remover and a clean microfiber cloth, followed by a smidgeon of scrubbing in order to be lifted. In contrast, graffiti removal on an unprotected surface will likely involve things like various cutting compounds, power tools, and a hefty amount of prayer.

Removing Graffiti From a Car That’s Been Ceramic Coated

Graffiti removal from a ceramic coated car is a lot easier than one might think, but only if you have the right ceramic coating installed. Photo Credit OCDetailing/YouTube
Graffiti removal from a ceramic coated car is a lot easier than one might think, but only if you have the right ceramic coating installed. Photo Credit: OCDetailing/YouTube

Unlike the act of removing a ceramic coating, getting an unsolicited stripe of spray paint, or a smudge of permanent marker off an automobile’s exterior should not require the use of power tools and polishing compounds. Hell, you might not even need to use a synthetic clay mitt, or some other form of clay decontamination media.

In most circumstances, if the vehicle has a healthy layer of 9H-strength ceramic coating in place, all you will need is a clean microfiber cloth, and a dash of bug and tar remover. It’s always a good idea to thoroughly decontaminate the area beforehand as well, using the two-bucket wash method, and combining it with a balanced, ceramic prep shampoo and a microfiber chenille wash mitt.

A quick isopropyl alcohol solution wipe-down afterward is never a bad idea either, as an IPA prep spray will guarantee that loose contaminants are not lingering on the surface.

There's nothing funny about discovering that some jackwagon has just hit your vehicle with a splash of spray paint graffiti. Photo Credit Aspect Detailing/YouTube
There’s nothing funny about discovering that some jackwagon has just hit your vehicle with a splash of spray paint graffiti. Photo Credit: Aspect Detailing/YouTube

As for the sudsy side of things, just wash the vehicle like you normally would, paying special attention to the types of surfaces where the unwanted pigment has been placed. Wash and dry complete, spritz the graffiti or “domestic incident” with some tar remover, wait a few seconds, and then buff the area with a multi-purpose microfiber cloth. This method will not remove a ceramic coating from a vehicle’s exterior, and does not require the use of a finishing polish.

Quick Tip: Since you will likely be working with a clear coated paint surface, thoroughly, and hastily removing the tar remover is crucial. The last thing anyone wants to see is their clear coat or ceramic coating bubbling-up because they allowed a harsh chemical cleaner to linger for too long.

Parting Shots

Tag at your own risk. We won't judge... Photo Credit MuscleKingz/Facebook
Tag at your own risk. We won’t judge… Photo Credit: MuscleKingz/Facebook

May it be the direct result of roving bands of vandals, rioting for all the wrong reasons, an accidental overspray during a DIY project, or a mischievous toddler with a permanent marker, graffiti is something you never want to see on your automobile.

However, few people ever consider graffiti as a genuine threat. The average car owner is far more interested in achieving a mirror-like shine from the cheapest, easiest-to-apply detailing solution available. They don’t give a fig about whether or not that weak-ass “ceramic product” has passed the standard test method for film hardness via a pencil scale. As long as that surface looks slick and shiny, all is right in the world…

Well we hate to break it to you buckos, but the world is a treacherous place, especially for our automobiles. Which is precisely why we came up with Armor Shield IX, and why DIY devotees can’t get enough of our ultra-easy and effective SiO2 Ceramic Booster Spray.

Finding the best way to protect a car’s paint at an affordable price is a constant balancing act, and here at AvalonKing, we do our damndest to walk that tightrope. A surface protectant should not break the bank, or your back, so hit us up if you agree, and let’s keep that graffiti at bay!

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Subscribe to our newsletter

Promotions, new products and sales. Directly to your inbox.